Features:
- Full HD(HD-SDI)for Industrial use – 2.1 million pixel RGB Beyer CMOS sensor, External event trigger for machine vision use
- Coaxial cable transmission – Easy replacement of conventional analogue (PAL/NTSC), camera with this full HD model, since it can transmit HD-SDI signal with existing coax cables. Approx. 100m transmission is realized by 5C-2V. Coax cable
- Small size/light weight / high sensitivity – Compact camera body size (44mm width and height) combined with light weight make this a flexible unit for many applications. High sensitivity of minimum photographic subject illumination 0.3lx means this camera can be used in many low light situations
- Non-compressing high definition
- Low delay (less than 16 ms) Direct monitoring is possible
Product Specifications
Imaging Device | 1/3″ CMOS |
Total Pixels | 2.1M pixels |
Video Format* | 1080・59.94i / 50i / 30p/25p |
Video Output | HD-SDI |
Transmission Distance* | 100m (5C-2V use) |
Minimum Photographic Subject Illumination* | 0.3lx (F1.2/AGC : MAX) |
AGC | ON/OFF |
Electronic Shutter Fixed/AES | |
Backlight Compensation | ON/OFF (Area to selection is possible.) |
White Balance Control | Auto/Priset/Manual |
Contrast Compensation | Dark part gray level correction |
Lenses | A galvanometer system |
Remote Control | RS-232C |
Lens Mount | C/CS mount |
Power Supply Voltage | DC+12V |
Ambient, Operating | -10℃ to +50℃ |
External Dimensions* | Approximately 44(W) x 44(H) x 59(D)mm |
Mass* | Approximately 130g (The lens is excluded) |
Reviews
There are no reviews yet.